Advanced Materials And Nanotechnology Cluster

The scope of the AMANAC-CSA is to create an effective and long lasting collaboration and coordination platform within all the Advanced Materials and Nanotechnology projects (AMANAC), approved in the frame of the EeB-PPP, whose activities address development of (nano)materials, components and systems for the improvement of the energy efficiency in the built environment. AMANAC-CSA aims to maximize the impact of the cluster participating projects towards the European Industry and Society and hence effectively support the objectives established by European Commission and the EeB-PPP by addressing in a holistic way the relevant technical/technological, industrial, economic, societal, organizational and regulatory challenges.

AMANAC is the cluster of all the Advanced Material and nanotechnology PPP-EeB projects under FP7. The cluster is an extension and further development of the Nano-E2B-Cluster, formed in 2011. It broadens the field of activities of the currently participating projects in a self- sustaining way.

AMANAC currently represents 30 European projects and about 280 projects partners. The projects have been grouped in the following six Thematic Areas:

  • Insulation material: AEROCOINs, HIPIN, VIP4ALL, HOMESKIN, ENE-HVAC, NANOHVAC, nanoCOOL, EENSULATE, GELCLAD, WALL IN ONE, INNOVIP
  • Embodied Energy: SUS-CON, LEEMA, BioBuild, Eco-Binder, ISOBIO
  • Smart Windows: HARWIN, MEM4WIN, SMARTBLIND, WINSMART
  • Lightweight Components: ADAPTIWALL, ELISSA, MF-RETROFIT, SESBE, FoAM-Build
  • Indoor Enviroment: Brimee, Eco-SEE, H-HOUSE, OSIRYS, CETIEB
  • Pilot Production: NANOLEP

The main objective of AMANAC is to join efforts in order to promote synergies and fields of cooperation among Projects whose activities focus on energy efficiency in the building environment. AMANAC Cluster will allow the involved projects to be more productive, competitive, successful and support them to establish a broader social and industrial impact.

"Insulation material" Thematic Area Sister Projects details:

AEROCOINs AEROCOINs

Aerogel-Based Composite/Hybrid Nanomaterials for Cost-Effective Building Super-Insulation Systems

aerocoins.eu
HIPIN HIPIN

High Performance Insulation based on Nanostructure Encapsulation of Air

hipin.eu
VIP4ALL VIP4ALL

Highly Sustainable and Effective Production of Innovative Low Cost Vacuum Insulation Panels for Zero Carbon Building Construction

vip4all.com
HOMESKIN HOMESKIN

Homes key insulating material

homeskin.net
ENE-HVAC ENE-HVAC

Energy efficient heat exchangers for HVAC application

ene-hvac.eu
NANOHVAC NANOHVAC

Novel Nano-enabled Energy Efficient and Safe HVAC ducts and systems contributing to a healthier indoor environment

nanohvac.eu
nanoCOOL nanoCOOL

An energy efficient air conditioning system based on the combination of a liquid desiccant cycle with an adapted conventional air cooling system

nanocoolproject.eu
GELCLAD GELCLAD

Highly efficient cladding eco-panels with improved nano-insulation properties

gelclad.eu
INNOVIP INNOVIP

Innovative multi-functional Vacuum-Insulation-Panels (VIPs) for use in the building sector

innovip-h2020.eu
WALL ACE WALL ACE

Wall insulation novel nanomaterials efficient systems

www.wall-ace.eu

News

07.09.2018 |Deep Renovation Joint Workshop in Rome

EENSULATE project partners from RINA are going to present our project at the “Deep renovation Joint Workshop - P2ENDURE TCP Workshop” that will take place on 5th October in Rome, Italy. The objective of the Workshop is to raise awareness on the most innovative building renovation and energy saving solutions and as well as to present and discuss altogether the main features of P2ENDURE e-marketplace.

More info, agenda and registration HERE.

15.07.2018 |EENSULATE presented at Euromembrane 2018 Conference

SAES presented the EENSULATE project during the Euromembrane 2018 conference which is an annual conference organized by the membrane group of the Research Institute for Industrial, Radio Physical and Environmental Safety on behalf of the European Membrane Society (EMS). The conference took place from 9 to 13 July 2018 in Valencia, Spain and SAES representatives focused on the sealant modelling in their presentation.

Social Media